Several factors get Intertecnica accessories together on the market.

The fasteners with frontal or side mounting, with or without lock, equipped with inside safety release, the hinges with or without ramp, with vertical adjustment to set up after installation, available for any door weight and thickness satisfy the many Customer’s requests.

The compensation valves Intertecnica have been planned for installation on prefabricated or wall cold rooms. Essential purpose of the valves is to balance the inside pressure with the outside pressure of the cold room.

The new sliding systems for small, medium and large cold room doors represent the new chance that Intertecnica gives to its Customers. They are even available with automatic opening device, in accordance to the current safety standards and the easy installation and operation are the result of long tests periods in its workshop.

Moreover… panel clamps, panel spacers, shelves and accessories complete Intertecnica products range.

Fasteners

  • FOR OVERLAPPING DOORS

    Series 1800 :

    Die-cast aluminium fasteners with black nylon han­dle reinforced by fiberglass
    • Available with one or three fastening points
    • Interchangeable right or left 

    Series 2000:

    Automatic fasteners in composite material, low temperature and corrosion resistant
    • Available with one or three fastening points
    • Interchangeable right or left 

    Series 3000:

    Automatic fasteners in composite material, low temperature
    and corrosion resistant
    • Available with one or three fastening points
    • Interchangeable right or left

    Series 5000AB:

    Fasteners in composite material, low temperature and corrosion resistant
    • Easy and quick mounting (only three pass-through holes)
    • Adjusting system on the catch (patented)
    • No door clearance encumbrance
    • European standard compliant cylinder (master key on request)
    • Interchangeable right or left
    • Inside release push-button
    • Tamper-proof fixing at closed door
    • Automatic catching device
    • Easy-to-clean surfaces 

    Series Mod. 5525 – 5725:

    Fasteners in composite material, low temperature and corrosion resistant
    • Easy and quick mounting procedure  (only three pass-through holes)
    • European standard compliant cylinder  (master key on request)
    • Interchangeable right or left
    • Inside release push-system
    • Tamper-proof fixing at closed door
    • Automatic catching device
    • Easy-to-clean surfaces 

    Series 5525 – 5725 with bar device:

    Fasteners in composite material, low temperature
    and corrosion resistant with bar device
    • Easy and quick mounting
    • European standard compliant cylinder (master key on request)
    • Interchangeable right or left
    • Inside release with bar device
    • Tamper-proof fixing at closed door
    • Automatic catching device
    • Easy-to-clean surfaces

    Fasteners with ergonomic vertical handgrip in composite material, low temperature and corrosion resistant
    • Easy and quick mounting (only three pass-through holes)
    • Adjusting system on the catch (patented)
    • Minimum door clearance encumbrance
    • European standard compliant cylinder (master key on request)
    • Interchangeable right or left
    • Inside release push-button / push-system
    • Tamper-proof fixing at closed door
    • Automatic catching device
    • Easy-to-clean surfaces 

    FOR SEMI-REBATED AND OVERLAPPING DOORS

    Series 4000:

    Fasteners complete with internal safety handle, in low temperature and corrosion resistant composite material
    • Easy and quick assembly
    • Suitable to be mounted on semi-inset and overlapping doors with thickness from approx 30 mm
    • European standards compliant

    Series 7000:

    Fasteners in composite material, low temperature and corrosion resistant
    • Easy and quick mounting
    • Adjustments: horizontal and in depth
    • No door clearance encumbrance
    • Patented perimetric gasket
    • European standard compliant cylinder (master key on request)
    • Interchangeable right or left
    • Inside door opening push device
    • Suitable for overlapping and semi-inset doors
    • Fastening mechanism positioned on outer part of cold room
    • Tamper-proof fixing at closed door
    • Automatic catching device
    • Easy-to-clean surfaces
    • Phosphorescent inside push-button

    Series 7000CQ:

    Fasteners in composite material, low temperature and corrosion resistant
    • Easy and quick mounting
    • Adjustments: horizontal and in depth
    • No door clearance encumbrance
    • Patented perimetric gasket
    • European standard compliant cylinder (master key on request)
    • Interchangeable right or left
    • Inside door opening push device
    • Suitable for overlapping and semi-inset doors
    • Fastening mechanism positioned on outer part of cold room
    • Tamper-proof fixing at closed door
    • Automatic catching device
    • Easy-to-clean surfaces
    • Phosphorescent inside push-button

    FOR FLUSH DOORS AND SPRAY BOOTHS

    Series 5000AB with 2115:

    Fasteners for FLUSH DOORS in composite material, low temperature
    and corrosion resistant
    • Easy and quick mounting  (only three pass-through holes)
    • Adjusting system on the catch (patented)  No door clearance encumbrance
    • European standard compliant cylinder  (master key on request)
    • Interchangeable right or left
    • Inside release push-button
    • Tamper-proof fixing at closed door
    • Automatic catching device
    • Easy-to-clean surfaces

    FOR MEDIUM/SMALL DOORS

    Series 790/791 – 795/796:

    Edge mounted automatic fasteners for medium/small
    doors
    • Interchangeable right or left
    • Provided with:
    – black painted strike for 9 to 22 mm offsets

    Series 880/885:

    Edge mounted automatic fasteners for medium/small
    doors
    • Interchangeable right o left
    • Provided with adjustable strike for 6 to 16 mm
    offsets

    FOR OVENS AND WARMING HEATED CHAMBERS

    Series 1625 -1635 FOR OVENS:

    Main application on doors in contact with heated chambers (ovens, proofers, industrial equipments)
    • Interchangeable right or left
    • Adjustable strike in depth, single or double latch for  safety opening system available 

Hinges

FOR OVERLAPPING DOORS

Series 2800:

Hinges in composite material, low temperature and corrosion resistant (patented)
• Adjustable in three directions: horizontal/simplified vertical/depth
• Snatch-proof pin and tamper-proof fixing at closed door
• Recessed auto-lubricating ramp
• Interchangeable right or left
• Modular shims
• Covers available in special colours according to quantities

Series 2800RV18:

Hinges in composite material, low temperature and corrosion resistant (patented)
• Adjustments: horizontal/dual vertical adjustment
• Snatch-proof pin and tamper-proof fixing at closed door
• Recessed auto-lubricating ramp
• Interchangeable right or left
• Modular shims
• Cover available in special colours according to quantities

Series 2800UD:

Hinges in composite material, low temperature and corrosion resistant (patented)
• Hinges specifically studied for universal step version doors. It’s possible to change the opening direction by a      simple “up &    down” door rotation
• Snatch-proof pin and tamper-proof fixing at closed door
• Interchangeable right or left
• Modular shims
• Cover available in special colours according to quantities 

Series 2900:

Hinges in composite material, low temperature and
corrosion resistant (patented)
• Adjustable in three directions:  horizontal/vertical/depth
• Recessed auto-lubricating ramp (patented)
• Interchangeable right or left
• Modular shims

Series 2900ECO:

Hinges in composite material, low temperature and corrosion resistant
• Interchangeable right or left
• Modular shims

FOR SEMI-REBATED DOORS

Series 600:

Hinges in composite material, low temperature and corrosion resistant
• Suitable for semi-rebated doors with 32 mm offset
• Availability for 40 and 52 mm offset
• Max door weight: kg 70

FOR SEMI-REBATED AND OVERLAPPING DOORS

Series 2500:

Hinges in composite material, low temperature and corrosion resistant, realized with three different types of body, with and without ramp or with ramp and spring for door lifting

Series 2600:

Hinges in composite material, low temperature and corrosion resistant, realized with and without ramp or with ramp and spring for door lifting

Series 2800B:

Hinges in composite material, low temperature and corrosion resistant
• Adjustable in three directions:   horizontal / vertical / depth
• Snatch-proof pin and tamper-proof fixing at closed door
• Interchangeable right or left
• Modular shims
• Cover available in special colours according to quantities

FOR FLUSH DOORS AND SPRAY BOOTHS

Series 100:

Die-cast aluminium alloy hinge with white plastic covers, 180° door opening
• Interchangeable right or left

FOR MEDIUM/SMALL DOORS

Models 525 – 430:

Hinges for small overlapping doors
• Snatch-proof pin and temper-proof fixing at closed door
• Interchangeable right or left
• Weight: gr 280

Series 300:

Bright polished hinges for small overlapping doors
• Invisible and tamper-proof fixing
• Interchangeable right or left

EMBEDDED PIVOT FOR DOORS AND SMALL DOORS

Pivot Hinges Mod. 28:

Embedded pivot hinges without stop
• Chromium plated metal body
• Max door weight kg 25
• Suggested precharge between 10° and 25°
• Interchangeable right or left
• Lower door support available in different heights
• Plastic driving bush for fixing pin
• Steel fixing pin 7,5 x 7,5 mm square section available with different pin outtop lenghts

Pivot hinge mod. IK20Z:

Embedded pivot hinges without stop
• Chromium plated metal body
• Suggested precharge between 10° and 25°
• Max door weight 6Kg
• Steel fixing pin 6 x 6 mm square section

DOUBLE ACTION

Hinges Mod. IK6050 IK6060:

Composite double action spring hinges for swing doors
• Door opening angle: 180°
• Max door thickness: 40 mm
• Max door weight (per couple): kg 30
• IK6050: with stop
• IK6060: without stop

Hinges Mod. 2 Inox/3 Inox:

Stainless steel double action spring hinges
• Door opening angle: 180°
• Adjustable spring
• Door thicknesses:
– Mod. 2: from 25 to 35 mm (weight gr 850)
– Mod. 3: from 25 to 40 mm (weight gr 1350)
• Max door weight:
– Mod. 2 – kg 25
– Mod. 3 – kg 35
News

International Trade Fairs 2017

In 2017 we will partecipate at the following International Trade Fairs:

2017 March 7 – 10 | KOREA

HARFKO 2017

​Where: Hall 7 & 8, Exhibition Center 2, Kintex
Stand Intertecnica: D-c838
Opening Time: 10:00 am – 5:00 pm

2017 April 12 – 14 | CHINA

CHINA REFRIGERATION 2017

​Where: Shanghai New International Expo Centre, Shanghai
Stand Intertecnica: E1G02
Opening Time: 10:00 am – 5:00 pm

Catalogue